Any one have a solution for this ZWAVE problems?

[bluegreen]

I’ve tried it for one week.But I can’t find the solution.

When I did sudo zwave_conf ,get errors bellow. And Can’t reboot .

---------------------------------------------------------------------------------

*** FPGA programmed!
/usr/bin/zwave_conf: line 26:  1195 Segmentation fault      modprobe spi_bcm2835
*** D1B78 MATRIX Creator EU has been detected

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415007] Internal error: Oops: 817 [#1] SMP ARM

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415338] Process modprobe (pid: 1195, stack limit = 0xa565e210)

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415351] Stack: (0xa565f5d0 to 0xa5660000)

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415360] f5c0:                                     00000000 7f12208c b46eaa10 b46eaa10

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415368] f5e0: 7f12208c fffffdfb a565f614 a565f5f8 80543d38 7f1200fc b46eaa10 80d1a064

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415382] f600: 80d1a068 00000000 a565f644 a565f618 80542318 80543ce8 00000000 7f12208c

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415399] f620: a565f690 b46eaa10 00000001 80d1a040 00000000 80c60f5c a565f664 a565f648

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415417] f640: 80542580 805420d8 b696a56c 00000000 a565f690 805424dc a565f68c a565f668
rmmod: ERROR: Module spi_bcm2835 is in use

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415426] f660: 80540400 805424e8 b696a56c b5f12738 b46eaa10 b46eaa10 b46eaa44 80c5fa20

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415434] f680: a565f6b4 a565f690 80541f84 80540398 b46eaa10 00000001 b46eaa18 b46eaa10

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415443] f6a0: 80c5fa20 00000000 a565f6c4 a565f6b8 805425b4 80541ed0 a565f6e4 a565f6c8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415451] f6c0: 80541474 805425a4 b77c3ba0 b46eaa18 b46eaa10 aab9e400 a565f724 a565f6e8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415460] f6e0: 8053f498 805413ec aab9e400 b46eaa00 a565f718 a565f700 8053ce34 a565f820

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415468] f700: 00000000 b46eaa00 b46eaa10 00000000 00000000 b36c3cc0 a565f744 a565f728

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415476] f720: 80543a10 8053f0b0 a565f820 aab9e400 b46eaa00 00000000 a565f78c a565f748

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415485] f740: 805689a0 80543960 00000000 00000000 00000000 000159ac b46eaa10 00000010

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415493] f760: ffffffff b36c3cc0 a565f864 00000000 aab9e400 ffffffff 00000008 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415502] f780: a565f7d4 a565f790 80568afc 805686b0 00000000 00000000 00000000 b46eb200

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415510] f7a0: a565f820 b36c3cc0 7f107090 00000008 aab9e400 b36c3d10 a565f820 ffffffff

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415518] f7c0: 7f107090 0000001f a565f80c a565f7d8 80568be0 80568a4c 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415526] f7e0: 00000000 00000000 00000000 b36c3c10 b36c3c10 b46eb200 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415535] f800: a565fa54 a565f810 7f10538c 80568b74 00000000 00000000 00000000 80160016

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415543] f820: 7f106280 00000000 00000000 00000000 00000000 00000000 00000000 b36c3c10

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415553] f840: 00000030 00000000 7f106280 00000000 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415561] f860: 00000000 7f106294 00000000 00000000 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415569] f880: b36c3c10 00000030 00000000 7f106294 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415577] f8a0: 00000000 00000000 7f1062a4 00000000 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415586] f8c0: 00000000 b36c3c10 00000030 00000000 7f1062a4 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415593] f8e0: 00000000 00000000 00000000 7f1062b4 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415602] f900: 00000000 00000000 b36c3c10 00000030 00000000 7f1062b4 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415610] f920: 00000000 00000000 00000000 00000000 7f1062c4 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415618] f940: 00000000 00000000 00000000 b36c3c10 00000030 00000000 7f1062c4 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415626] f960: 00000000 00000000 00000000 00000000 00000000 7f1062d4 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415634] f980: 00000000 00000000 00000000 00000000 b36c3c10 00000030 00000000 7f1062d4

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415642] f9a0: 00000000 00000000 00000000 00000000 00000000 00000000 7f1062e4 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415650] f9c0: 00000000 00000000 00000000 00000000 00000000 b36c3c10 00000030 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415658] f9e0: 7f1062e4 00000000 00000000 00000000 00000000 00000000 00000000 7f1062f4

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415666] fa00: 00000000 00000000 00000000 00000000 00000000 00000000 b36c3c10 00000030

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415674] fa20: 00000000 7f1062f4 00000000 00000000 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415683] fa40: 00000000 aab9e400 a565fa7c a565fa58 7f1054a8 7f105284 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415691] fa60: a565fa7c aab9e400 00000000 7f107080 a565fa9c a565fa80 8058f1d0 7f1053a0

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415705] fa80: 8058f144 aab9e400 80d1a064 80d1a068 a565facc a565faa0 80542318 8058f150

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415713] faa0: 00000000 7f107090 a565fb18 aab9e400 00000001 80d1a040 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415722] fac0: a565faec a565fad0 80542580 805420d8 b69fba6c 00000000 a565fb18 805424dc

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415730] fae0: a565fb14 a565faf0 80540400 805424e8 b69fba6c b5f12438 aab9e400 aab9e400

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415739] fb00: aab9e434 80c65d30 a565fb3c a565fb18 80541f84 80540398 aab9e400 00000001

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415747] fb20: aab9e408 aab9e400 80c65d30 00000000 a565fb4c a565fb40 805425b4 80541ed0

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415756] fb40: a565fb6c a565fb50 80541474 805425a4 b77c3ba0 aab9e408 aab9e400 aab9d400

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415764] fb60: a565fbac a565fb70 8053f498 805413ec 8058fa30 804cd8d4 00000000 aab9e400

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415773] fb80: a565fbac aab9e400 00000000 aab9d400 b6a37e10 b6a37e10 b36c3b14 0000001f

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415781] fba0: a565fbcc a565fbb0 8059002c 8053f0b0 aab9e400 b700c7e4 00000000 aab9d400

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415790] fbc0: a565fbfc a565fbd0 80590780 8058ff94 00000000 a565fbe0 8064d4b4 00e4e1c0

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415798] fbe0: aab9d400 b700c7e4 b700c834 00000000 a565fc3c a565fc00 80592170 805905a0

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415807] fc00: b36c3ac0 014000c0 00000000 aab9d710 7e204004 00000063 aab9d400 b36c3b50

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415815] fc20: aab9d400 b6a37e10 aab9d710 7e204004 a565fc5c a565fc40 80592678 80591fd8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415823] fc40: aab9d400 00000000 b6a37e10 b6a37e00 a565fcc4 a565fc60 7f69a814 8059263c

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415832] fc60: 00000000 b6a1c700 aab9d400 809bd024 b6a1e660 00000002 7e204004 7e204004

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415840] fc80: 00000004 00000004 80309c94 8030603c b6a37e10 b6a37e10 7f69c014 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415849] fca0: b6a37e10 b6a37e10 7f69c014 fffffdfb 00000000 7f69c014 a565fce4 a565fcc8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415857] fcc0: 80543d38 7f69a56c b6a37e10 80d1a064 80d1a068 00000000 a565fd14 a565fce8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415866] fce0: 80542318 80543ce8 00000000 b6a37e10 7f69c014 b6a37e44 00000000 00000001

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415874] fd00: 7f69c0c8 b356e048 a565fd34 a565fd18 80542490 805420d8 b696a558 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415882] fd20: 7f69c014 805423d4 a565fd5c a565fd38 8054032c 805423e0 b696a558 b6a1f0b4

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415891] fd40: b696a56c 7f69c014 aaa71100 80c5fa20 a565fd6c a565fd60 80541c54 805402bc
#ZM5202 Response: 53 : AA

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415899] fd60: a565fd94 a565fd70 80541730 80541c34 7f69b568 a565fd80 7f69c014 7f69f000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415908] fd80: 00000000 7f69c080 a565fdac a565fd98 80542c04 80541590 7f69c080 7f69f000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415916] fda0: a565fdbc a565fdb0 80543c88 80542b88 a565fdcc a565fdc0 7f69f020 80543c44

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415925] fdc0: a565fe3c a565fdd0 80101bf0 7f69f00c 0001596f 3644a000 80265f50 aa8c1400

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415933] fde0: 0001596f 80276be4 a565fe3c a565fdf8 80276be4 8027245c 80278088 8027752c

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415942] fe00: 00000001 0001596f b477ac00 a0000013 b9a8b000 7f69c080 00000001 7f69c080

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415950] fe20: 00000001 b477a880 00000001 7f69c0c8 a565fe64 a565fe40 801a936c 80101bac

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415959] fe40: a565fe64 a565fe50 80266044 a565ff38 00000001 b356e040 a565ff14 a565fe68

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415970] fe60: 801a8390 801a9304 7f69c08c 00007fff 7f69c080 801a5518 a565ff2c 7f69c26c
#Serie 500 chip found

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415978] fe80: 809c3378 7f69c1b0 7f69c180 00000000 7f69c194 a565ff38 a565fee4 a565fea8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415986] fea0: 80290b54 8028a890 aab4acc0 00000000 00000000 00000000 00000000 00000000
#Chip Ready

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.415994] fec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416003] fee0: 00000000 00000000 7fffffff 00000000 00000003 0002cd30 0000017b 7fffffff

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416011] ff00: 00000000 00000000 a565ffa4 a565ff18 801a8ce4 801a6774 7fffffff 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416019] ff20: 00000003 8016cd34 00000002 b9a8b000 00003a8c 00000000 b9a8c39f b9a8b000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416027] ff40: 00003a8c b9a8e514 b9a8d0e5 b9a8da28 00003000 00003390 00000000 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416035] ff60: 00000000 00001d2c 00000021 00000022 0000001a 00000016 00000012 00000000

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416044] ff80: 5afd87cb c7a29800 0016c2f0 00000000 80108204 a565e000 00000000 a565ffa8

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416052] ffa0: 80108060 801a8c54 c7a29800 0016c2f0 00000003 0002cd30 00000000 0002d71c

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416061] ffc0: c7a29800 0016c2f0 00000000 0000017b 00040000 00000000 00000000 0016cfe0

Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416082] ffe0: 7ed97380 7ed97370 0002212c 76e344f0 60000010 00000003 00000000 00000000


Message from syslogd@raspb at May 18 11:53:25 ...
 kernel:[  693.416573] Code: eb508ba0 e30030c0 e3473f12 e5840004 (e5803014)
#Chip Ready
#Chip Ready
#NVR check process OK
#NVR check process OK
NVR_Status=1
#Zwave NVR has been programmed !!!
ZM5202 Response: 53
Status: 0
Chip Ready
....0
....1
....2
....3
....4
....5
....6
....7
....8
....15
....16
....17
....18
....19
....20
....21
....22
....23
....24
....25
....26
....27
....28
....29
....30
....31
....32
....33
....34
....35
....36
....37
....48
....49
....50
....51
....52
....53
....54
....55
....63

------------------------------------------

[Chozandrias]

I’m guessing this has a relationship to ZWave installation issues on Creator and following this guide? https://github.com/matrix-io/matrix-malos-zwave

I was also trying to set up my Matrix Creator to expose the Zwave “layer” for my homeassistant I am setting up. Much of my config in that guide had already done, so these were the steps I was following:

➜  homeassistant 
[    0.942412] hub 1-1:1.0: USB hub found
➜  homeassistant sudo apt-get install matrixio-zwave-utils

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  matrixio-zwave-utils
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 18.3 kB of archives.
After this operation, 420 kB of additional disk space will be used.
Get:1 https://apt.matrix.one/raspbian buster/main armhf matrixio-zwave-utils armhf 0.2.1 [18.3 kB]
Fetched 18.3 kB in 0s (43.8 kB/s)               
Selecting previously unselected package matrixio-zwave-utils.
(Reading database ... 113567 files and directories currently installed.)
Preparing to unpack .../matrixio-zwave-utils_0.2.1_armhf.deb ...
Unpacking matrixio-zwave-utils (0.2.1) ...
Setting up matrixio-zwave-utils (0.2.1) ...
MATRIXIO-Zwave-Utils has been installed succesfully
➜  homeassistant zwave_conf 
/usr/bin/zwave_conf: line 4: ID.conf: Permission denied
/usr/bin/zwave_conf: line 5: ID.conf: No such file or directory
***  does not MATCH -- FAIL 
➜  homeassistant sudo zwave_conf 
*** DE88C MATRIX Creator US has been detected 
INFO: [/dev/matrixio_regmap] was opened
#ZM5202 Response: 53 : AA
#Serie 500 chip found
#Chip Ready
#Chip Ready
#Chip Ready
#NVR check process OK 
#NVR check process OK 
NVR_Status=1
#Zwave NVR has been programmed !!! 
INFO: [/dev/matrixio_regmap] was opened
#ZM5202 Response: 53 : AA

[Samreen]

@Chozandrias,

Is ZWave working for you?

There was a kernel issue with the latest Linux kernel 4.19 that was preventing it from working properly.

Best,
Samreen

[Chozandrias]

I’m about to compile https://github.com/raspberrypi/linux/tree/rpi-5.5.y but I guess I should ask if there is a Kernel version you would recommend? I figure you would know more about this kind of stuff

[Chozandrias]

I was finally able to make some progress, but I’m afraid Linux 4.20 didn’t seem to work with this so far:

➜  ~ more /tmp/zipgateway.log
15527 Opening config file /usr/local/etc/zipgateway.cfg
Starting Contiki
Opening eeprom file /usr/local/var/lib/zipgateway/eeprom.dat
Lan device tap0
LAN HW addr F2:47:97:82:9B:1B
15588 Starting zipgateway ver2_61 build ver2_61
15588 Resetting ZIP Gateway
15603 Using serial port /dev/ttyMATRIX0
 SerialAPI: Retransmission 0 of 0x07
 SerialAPI: Retransmission 1 of 0x07
 SerialAPI: Retransmission 2 of 0x07
 SerialAPI: Retransmission 3 of 0x07
 SerialAPI: Retransmission 4 of 0x07
 SerialAPI: Retransmission 5 of 0x07
 SerialAPI: Retransmission 6 of 0x07
 SerialAPI: Retransmission 7 of 0x07
 SerialAPI: Reopening serial port
 SerialAPI: Retransmission 8 of 0x07
 SerialAPI: Retransmission 9 of 0x07
 SerialAPI: Retransmission 10 of 0x07
 SerialAPI: Retransmission 11 of 0x07
 SerialAPI: Retransmission 12 of 0x07
 SerialAPI: Retransmission 13 of 0x07
 SerialAPI: Retransmission 14 of 0x07
 SerialAPI: Retransmission 15 of 0x07
 SerialAPI: Reopening serial port

...skipping 1 line
 SerialAPI: Retransmission 17 of 0x07
 SerialAPI: Retransmission 18 of 0x07
 SerialAPI: Retransmission 19 of 0x07
 SerialAPI: Unable to send frame!!!!!!
 SerialAPI: SendFrameWithResponse() returning failure
 SerialAPI: SendFrameWithResponse(FUNC_ID_SERIAL_API_GET_CAPABILITIES,...) failed in SerialAPI_Init()
 SerialAPI: Assertion failed at /drone/src/src/serialapi/Serialapi.c:435
64823 Error opening serial API
64823 Fatal error

Should I keep trying builds or is this something that still needs to be resolved?

ZWave installation issues on Creator

@cdmnky, Good point, there currently is not a GitHub issue. I’ll work with our hardware engineers to create one with the problem detailed and link here soon. Best, Samreen

Help with zipgateway

So, tried exactly what you said: . clean Raspbian installation . followed steps from GitHub malos-zwave Errors: sudo zwave_conf ID.conf: line 1: INFO:: command not found *** FFFFFF does not MATCH – FAIL (I imagine because I run it before, so ZM5202 already has the right configuration) sudo apt-get install matrixio-malos-zwave Reading package lists… Done Building dependency tree Reading state information… Done Some packages could not be installed. This may mean that you have reque…

[Samreen]

@Chozandrias,

Apologies for the delayed response.

The ZWave kernel issue came up when the Linux kernel got updated to 4.19. I’m not sure if downgrading Linux kernels from there would result in ZWave working again because I don’t know if all the kernel modules can be rolled back. This is something I would have to test.

I saw on your other post that you got smart lights working with home assistant. Is that using WiFi?

Best,
Samreen

[Chozandrias]

I got the Zigbee controller working. I haven’t got it routed through MQTT though. I’m back on 4.19.118-v7l+ now.